SURFACE MOUNTING POWER MANAGEMENT ICS TPSM82480MOPT 0.6V - 5.5V OUTPUT
| Type: | Drive IC | Price: | Pls Contact Us |
| Temperature: | Standing C | Shipping Way: | Post Office And So On |
| Application: | Driver/Controller |
| High Light: | Surface Mounting Power Management ICs , 5.5V Power Management ICs , TPSM82480MOPT |
Power Management ICs Texas Instruments/TI TPSM82480MOPT
| ECAD Module | Build or Request PCB Footprint or Symbol |
| Supply and Demand Status | Balance |
| Popularity | High |
| Fake Threat In the Open Market | 63 pct. |
| Quantity per package | 1 |
| Mounting | Surface Mount |
| Operating Temperature Range | -40°C ~ 125°C |
| Package | Bulk |
| Series | TPS |
| Manufacturer | Texas Instruments |
| Features | Non-Isolated PoL Module DC DC Converter Output 0.6 ~ 5.5V - - - 6A 2.4V - 5.5V Input |
| Package | 24-SMD Module |
| Case / Package | 24-QFM (7.9x3.6) |
| Categories | Power Supplies - Board Mount |
- Ultra small 3.6 × 7.9 × 1.55 mm power module
- CISPR11 Class B compliant
- Feedback voltage accuracy: ±1%
- Input voltage range: 2.4 V to 5.5 V
- Output voltage range: 0.6 V to 5.5 V
- Output current: 6-A with no derating at TA = 85 °C
- Typical quiescent current: 23 µA
- Output voltage select (two user-defined values)
- Phase-shifted operation
- Automatic power save mode or forced PWM option
- Adjustable soft-start and tracking
- Power good and thermal good outputs
- Undervoltage lockout protection
- Overcurrent and short-circuit protection
- Over-temperature protection
- Operating temperature range: –40°C to 125°C
The TPSM82480 is a synchronous step-down DC-DC converter module for low profilepoint-of-load power supplies. The input voltage range of 2.4 V to 5.5 V enables operation fromtypical 3.3-V or 5-V interface supplies as well as from backup circuits dropping down as low as 2.4V.
The output current is up to 6 A continuously provided by two phases of 3 A each, whichrun out-of-phase, reducing pulse current noise significantly.
The TPSM82480 provides an automatically entered power save mode to maintain highefficiency down to very light loads. This incorporates an automatic phase adding and sheddingfeature using both or only one phase according to the actual load. The power save mode can beswitched off using the MODE feature.
The device offers a power good signal and an adjustable soft-start period. Also, thedevice features a thermal good signal to indicate excessive internal temperature. The outputvoltage can be changed to a preselected value by VSEL pin. TPSM82480 is able to operate in 100%duty cycle mode.
